For in vitro diagnostic use and clinical validation. Third-party validation is ongoing.
72 hoursambient at 18–25°C
Zerodry ice or gel packs
Zeroon-site centrifugation
6–12 monthsunused tube at 15–25°C
Third-party validation is ongoing. Validate it yourself, free.
Independent validation of MonoImmune™ is in progress. Anyone who wants to validate our products can have free evaluation samples. Compare 72-hour PBMC recovery, viability and flow cytometry performance with your current collection standard.
MonoImmune™ CSP (Cell Stabilization & Preservation) is a sterile, evacuated 10 mL whole blood collection tube. It locks in PBMC viability, metabolic activity and native surface marker architecture at 18–25°C for up to 72 hours, without freezing or immediate handling.
What problem does it solve?
The 24-hour race: standard protocols need site-level Ficoll processing, a centrifuge or temperature-controlled logistics within a day.
Cell damage in transit: delays cause degradation, granulocyte degranulation, selective monocyte loss and surface epitope shedding.
Remote sites cannot process: clinics and field sites often have no centrifuge or cold chain.
MonoImmune™ stabilizes the blood at the point of draw, so the cells you analyse match the cells you collected.
Key advantages
72-hour ambient stability (18–25°C): ship whole blood with standard ambient couriers. No dry ice, gel packs or phase-change shippers.
Live, unfixed cells: no aldehydes or crosslinkers. Recovered PBMCs are ready for culture, T-cell and monocyte assays and single-cell multiomics.
No on-site centrifugation: collect at remote sites and process in batches at your core facility up to 3 days after the draw.
Native surface epitopes: the stabilization matrix limits leukocyte activation and marker shedding for sharp, reproducible gating in multiparameter flow cytometry.
Which samples can I use it with?
Human whole venous blood (7.5 mL draw)
Clinical trial and multi-centre biomarker samples
Samples from clinics, physician offices and field sites
Fill to the printed 9.0 mL line. Maximum operating range is 8.0–8.5 mL of blood.
How long can I store or transport the sample?
72 hoursblood-filled tube at 18–25°C
6–12 monthsunused tube at 15–25°C
12+ monthsunused tube at 4°C
MonoImmune storage and transit conditions
Stage
Condition
Window
Unused tube, long term
4°C (2–8°C). Do not freeze.
More than 12 months
Unused tube, clinic or field
15–25°C
6–12 months
Blood-filled tube, transit
18–25°C, upright. Do not refrigerate or freeze.
Up to 72 hours
Which tests or workflows does it support?
Multiparameter flow cytometry and immunophenotyping
ELISpot
Intracellular cytokine staining (ICS)
Cytokine release assays
T-cell proliferation
Live cell culture
scRNA-seq
scATAC-seq
TCR/BCR repertoire sequencing
Biobanking and cryopreservation
Decentralized clinical trials
Compare the data
Collection approaches compared
MonoImmune compared with gel-barrier CPT tubes and fixative-based tubes
Parameter
Gel-barrier CPT tube
Fixative-based tube
MonoImmune™
On-site centrifugation
Needed soon after draw
Not needed
Not needed
Typical holding window
Process within about 24 hours
Ambient
Up to 72 hours at 18–25°C
Cell state
Live
Fixed (cells killed)
Live, unfixed
Live culture and functional assays
Yes, if processed in time
No
Yes (ELISpot, ICS, culture)
Cold chain
Often needed for delays
None
None
Differences are described from product design. Third-party validation of MonoImmune™ is ongoing.
Specifications
Tube format
10 mL evacuated PET tube, 9.0 mL fill mark
Stabilizer
1.5 mL proprietary, chemically defined, ACD-based medium
Target blood draw
7.5 mL whole venous blood (8.0–8.5 mL maximum). Ratio 1:5
Reagent pH
7.1 ± 0.1 (buffers to physiological pH 7.3–7.4 on mixing)
Osmolality
290–305 mOsm/kg (isotonic)
Tube material
Medical-grade, shatter-resistant clear PET
Cap and label
Clinical yellow safety pull-cap, deep violet label, clear viewing window
Sterility
Sterile interior (0.22 µm aseptic filtration or validated sterilization), single-use
Packaging
Vacuum-sealed moisture-barrier foil pouches, 50 tubes per box
Catalogue code
MonoImmune catalogue code
Catalogue no.
Product
Pack
RVN-MI-1.5
MonoImmune™ PBMC CSP Tube, 10 mL evacuated tube with 1.5 mL stabilizer
Pack of 50 tubes
Quality control and batch release
Quality system: manufactured under ISO 9001:2015 quality management at the Ruhvenile® facility in New Delhi. Independent validation is ongoing.
Every lot is tested for: reagent pH (7.1 ± 0.1) and osmolality, vacuum draw accuracy and fill volume, visual clarity and particle-free inspection, sterility and endotoxin (below 0.25 EU/mL).
How do I use it?
Collect: perform venipuncture and draw until the vacuum stops at the 9.0 mL line (7.5 mL blood).
Mix: invert gently 8–10 times straight away. Do not shake or vortex.
Ship: keep upright at 18–25°C for up to 72 hours. Do not refrigerate or freeze.
Isolate: run density-gradient centrifugation (Ficoll-Paque™ or Lymphoprep™) at your core laboratory.
Analyse: use the PBMCs for flow cytometry, culture, functional assays or single-cell sequencing.
How is it different from other Ruhvenile® and available products?
Gel-barrier CPT tubes: need on-site centrifugation and processing within about 24 hours. MonoImmune™ needs neither.
BloodGnom™: preserves blood DNA, RNA, cfDNA and cfRNA for extraction. Use MonoImmune™ when you need live, functional PBMCs. See BloodGnom™.
sCellTisu™: for solid tissue biopsies. See sCellTisu™.
Validation status and free samples
Third-party validation of MonoImmune™ is ongoing. We will publish independent data when it is available.
If you want to validate our products, we are ready to supply free samples. The evaluation starter kit has 5 tubes. Tell us your assay and site and we will send it.
A sterile, evacuated 10 mL whole blood collection tube with 1.5 mL of ACD-based cell stabilization medium. It keeps live PBMCs viable and functional for up to 72 hours at 18–25°C without cold chain or on-site centrifugation.
Is MonoImmune™ independently validated?
Third-party validation is ongoing. We supply free evaluation samples to any laboratory that wants to validate MonoImmune™ against its current collection standard.
How do I get a free sample?
Use the Request free sample button, WhatsApp +91 858 703 3367 or email info@ruhvenile.com. The evaluation starter kit contains 5 tubes. Tell us your assay and site so we can suit the kit.
Is MonoImmune™ for diagnostic use?
The tube is labelled for in vitro diagnostic use and for clinical validation and verification. Third-party validation is ongoing.
How is MonoImmune™ different from gel-barrier CPT tubes?
MonoImmune™ needs no immediate on-site centrifugation after blood collection. Gel-barrier tubes typically need processing within 24 hours, while MonoImmune™ extends the ambient holding and transit window to up to 72 hours.
How is MonoImmune™ different from fixative-based blood tubes?
Fixative tubes use aldehydes or cross-linkers that kill the cells and block functional assays. MonoImmune™ uses a chemically defined ACD-based medium that keeps PBMCs alive and metabolically intact for culture, ELISpot and single-cell RNA sequencing.
How should I store unused tubes?
Unused tubes keep for more than 12 months at 4°C (2–8°C) and for 6–12 months at 15–25°C, so clinic and field stations do not need a fridge. Do not freeze.
Can blood-filled tubes be refrigerated during transit?
No. Keep blood-filled tubes at 18–25°C for the whole transit. Cold (2–8°C or ice packs) can alter membrane fluidity and reduce PBMC recovery. Do not freeze.
How much blood do I draw?
7.5 mL of whole venous blood (8.0–8.5 mL maximum) into the 10 mL tube. The vacuum stops at the printed 9.0 mL line. The stabilizer-to-blood ratio is 1:5.
Which isolation methods work after transport?
Standard density-gradient centrifugation, for example Ficoll-Paque™ or Lymphoprep™, at your central core laboratory up to 72 hours after the draw.
Which downstream assays is MonoImmune™ designed for?
Multiparameter flow cytometry, ELISpot, intracellular cytokine staining, cytokine release and T-cell proliferation assays, live cell culture, scRNA-seq, scATAC-seq, TCR/BCR sequencing and biobanking.
Why use MonoImmune™ in decentralized clinical trials?
Remote sites can collect blood without a centrifuge or cold chain and ship it ambient to one central lab, so specimen handling is standardised across sites.
Datasheet download
PDF
MonoImmune™ PBMC CSP Tube datasheet
Specifications, storage, handling, quality control and validation status in a 2-page PDF.
Tell us your assay, site and study size. We send a free evaluation starter kit so you can validate it head-to-head against your current collection standard. Bulk quotes on request. Dispatch within 3–5 working days.